da Mafi Bakin Karfe gasket gama ingancin factory kai tsaye tallace-tallace factory da kuma masana'antun |Zhey

Bakin karfe gasket gama ingancin factory kai tsaye tallace-tallace

Takaitaccen Bayani:

Material: Kamar yadda karfe da aka yi amfani da shi sosai, yana da juriya mai kyau / juriya na zafi, ƙarancin zafin jiki da kaddarorin inji;Stamping / lankwasawa da sauran thermal aiki, babu zafi magani hardening sabon abu (ba Magnetic, suna amfani da zazzabi -196 ℃ ~ 800 ℃).
Ana amfani da: kayan gida (1/2 kayan tebur / majalisar ministoci / bututun cikin gida / hita ruwa / tukunyar jirgi / bathtub), sassa na mota (kayan goge iska / masu gyare-gyaren gyare-gyare), kayan aikin likita, kayan gini, sunadarai, masana'antar abinci, aikin gona, jirgin ruwa sassa.


Cikakken Bayani

Tags samfurin

Abubuwan Jiki

1. Akwai ions chloride a cikin yanayin aiki.

Ana samun ions chloride a cikin gishiri, gumi, ruwan teku, iska, ƙasa, da dai sauransu. Bakin ƙarfe yana lalata da sauri a gaban ions na chloride fiye da ƙarancin ƙarfe na yau da kullun.

Don haka amfani da yanayin bakin karfe yana da buƙatu, kuma buƙatar sau da yawa goge, cire ƙura, kiyaye tsabta da bushewa.(Wannan yana ba shi "amfani da bai dace ba.")

Akwai misali a Amurka: wata kamfani ta yi amfani da kwandon itacen oak don riƙe wani bayani mai ɗauke da ions chloride.An yi amfani da kwantena fiye da shekaru ɗari kuma an shirya maye gurbinsa a cikin 1990s.Saboda kayan itacen oak bai isa na zamani ba, kwandon ya lalace kuma ya zube kwanaki 16 bayan maye gurbin da bakin karfe.

2. Babu magani magani.

Abubuwan haɗin gwal ba su narke a cikin matrix ba, wanda ya haifar da ƙananan abun ciki a cikin tsarin matrix da ƙarancin lalata.

3. Irin waɗannan kayan ba tare da titanium da niobium suna da dabi'ar dabi'a zuwa lalata intergranular.

Bugu da kari na titanium da niobium, hade tare da barga magani, iya rage intergranular lalata.

A cikin iska ko sinadarai lalata matsakaici iya tsayayya da lalata na babban gami karfe, bakin karfe ne mai kyau surface da kuma mai kyau lalata juriya, ba dole ba da za a plated da sauran surface jiyya, da kuma taka muhimmi surface Properties na bakin karfe, amfani a cikin. abubuwa da yawa na nau'in karfe, yawanci ana kiransa bakin karfe.A madadin aikin 13 chromium karfe, 18-8 chromium nickel karfe da sauran babban gami karfe.

Daga ra'ayi na metallographic, saboda bakin karfe yana ƙunshe da chromium da farfajiyar samuwar fim ɗin chromium na bakin ciki sosai, fim ɗin ya rabu da iskar oxygen a cikin mamayewar ƙarfe na lalata juriya.

Don kiyaye juriyar lalata da ke cikin bakin karfe, dole ne karfe ya ƙunshi fiye da 12% chromium.

304 Bakin Karfe Shim Plates shine bakin karfe na duniya, wanda aka yi amfani da shi sosai wajen kera kayan aiki da sassan da ke buƙatar ingantaccen kaddarorin (lalata juriya da tsari).

304 bakin karfe alama ce ta bakin karfe da aka samar daidai da ka'idojin ASTM a Amurka.304 daidai yake da bakin karfe na 0Cr19Ni9 (0Cr18Ni9) na kasar Sin.304 ya ƙunshi 19% chromium da 9% nickel.

304 shine mafi yawan amfani da bakin karfe / karfe mai jure zafi.Ana amfani dashi a cikin kayan samar da abinci / kayan aikin sinadarai na xiton / makamashin nukiliya, da sauransu.

304 yayi daidai da alamar Sinawa 0Cr18Ni9,1Cr18Ni9Ti, abun ciki na carbon ≤0:08%

304Lstainless karfe Shim Plates shine bambance-bambancen 304 bakin karfe Shim Plates bakin karfe tare da ƙananan abun ciki na carbon kuma ana amfani dashi don aikace-aikacen walda.Ƙananan abun ciki na carbon yana rage yawan hazo a cikin yankin da zafi ya shafa a kusa da walda, wanda zai iya haifar da lalata intergranular (lambar walda) a cikin bakin karfe a wasu wurare.

Siga

T taurin taurin Hazo hardening zafi magani yanayin m%
taurin taurin Ƙarfin da ake samu N/mm Ƙarfin ƙarfi N/mm elongation% Maganin zafi taurinHV Ƙarfin da ake samu N/mm Ƙarfin ƙarfi N/mm
301-CSP 1/2H 340± 30 ≥510 ≥930 ≥10 - - - - 2.3
3/4H 400± 30 ≥745 ≥ 1130 ≥5 - - - - 2.3
H 460± 30 ≥ 1030 ≥1320 - - - - - 2.3
EH 510± 20 ≥1275 ≥1570 - - - - - 2.3
SEH ≥530 ≥ 1450 ≥1740 - - - - - 2.3
304-CSP 1/2H 280± 30 ≥470 ≥780 ≥6 - - - - 2.3
3/4H 340± 30 ≥ 665 ≥930 ≥3 - - - - 2.3
H ≥370 ≥880 ≥ 1130 - - - - - 2.3
631-CSP 0 ≤200 - ≤1030 ≥20 Saukewa: TH1050RH950 ≥345≥392 ≥960≥1030 ≥1140≥1230 2.3
1/2H 375± 25 - ≥ 1080 ≥5 CH ≥380 ≥880 ≥ 1230 2.3
3/4H 425± 25 - ≥1180 CH ≥450 ≥ 1080 ≥ 1420 2.3
H ≥450 - ≥ 1420 CH ≥530 ≥1320 ≥1720 2.3

  • Na baya:
  • Na gaba: